How do you build a mantle?

VIDEO

.

Then, how do you make a mantle?

1. lift old fireplace door unit out. Demolition.
2. Mark for Mantel. Mantles are usually 60 inches off the floor.
3. position mantel brace on line at center and attach. Attach Mantel Brace.
4. cut a breastplate to fit around brace. Attach Breastplate.
5. prev.
6. Trim and Finish Mantel.
7. new fireplace doors go in just like old doors.

Similarly, what is the best wood to make a fireplace mantel? Fireplace Mantel Wood Options When looking for durability, consider a very dense wood like Cherry, Walnut, Mahogany, or Reclaimed Antique Heart Pine. When looking for affordability, consider woods like Poplar, Maple, or Oak.

Also, how do you build a mantel surround?

The fireplace surround is finished with pine face trim along with cove and crown molding for some added detail.

1. Build the pillars for the fireplace surround out of MDF.
2. Trim out the DIY fireplace surround pillars.
3. Build the DIY fireplace surround box beam header.
4. Prepare the wood for the fireplace mantel.

How do you hang a heavy mantle on drywall?

Make sure those marks are level, centered and extend far enough to cover the mantel's length.

1. drill holes at each mark. Drill Sleeve Holes. Drill holes at each mark using a drill and 3/4" masonry bit.
2. insert lead sleeves into holes. Insert Sleeves.
3. drive lag bolts. Drive Lag Bolts.
4. install the mantle. Install Mantel.

Related Question Answers

How do you install a floating mantel?

How to Install a Mantel

1. Remove the old mantel.
2. Add support by drilling holes for lag shields, then install lag bolts into the brick.
3. Measure carefully and drill corresponding holes for the wood mantel.
4. Push the wooden mantel carefully into place using wood glue for extra support.

How do you make a faux beam?

DIY Faux Wood Beams

1. Step 1: Find and mark the studs in your room.
2. Step 2: Measure, cut and, attach untreated (and unfinished) pine 1″ x 8″s to your ceiling.
3. Step 3: Begin to create your faux beams.
4. Step 4: Lightly sand and wipe your beams.
5. Step 5: Stain your beams.
6. Step 7: Cover the gaps for a finished look.

How do I decorate my mantel?

Use the approach as an elegant mantel decorating idea for instant chic. Start with a pair of wall sconces, one mounted on each side of the fireplace, and place a round mirror in the middle. Use similar-shape objects on the mantel to maintain the orderly look.

How do you hang a mantel on drywall?

Lift the mantle back into place. Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall.

What materials can be used for a fireplace surround?

Fireplace Design Idea – 6 Different Materials To Use For A Fireplace Surround

• STEEL. One of the most popular fireplace surround materials.
• WOOD. A less obvious choice for a fireplace surround, considering what you burn, is wood.
• CONCRETE.
• STONE.
• BRICK.
• TILE.

How do you fit a wooden fire surround?

Place the top assembly, known as the breast, with the mantel shelf on the floor facing down. Unwrap the legs, and insert the pins into the holes. Twist the locks to secure the legs with the breasts. Once you've attached the legs, turn the mantel over, and place it into position over the fireplace opening.

How wide should fireplace surround be?

For a quick reference, a 36-inch fireplace will probably have a mantel width of 48 inches. A 42-inch fireplace will probably have a mantel width of 54 inches. The mantel should not be so wide that it reaches anything else, like a wall, window or door.

How much does a custom fireplace mantel cost?

Cost to Install a Fireplace Mantel

Fireplace Mantel Costs	Zip Code	Mantels
Basic	Better
Fireplace Mantel – Installation Cost	$150.25 - $175.35	$190.50 - $220.05
Fireplace Mantel – Total	$435.25 - $525.35	$745.50 - $1045.05
Fireplace Mantel – Total Average Cost per Lineal Foot	$480.30	$895.27

How do you make a rustic mantle?

1. Cut the wood to size.
2. Age and distress the wood beam.
3. Sand down the mantel.
4. Assess the distressed markings.
5. Step 6: Stain and apply paint treatment.
6. Mark the location of the corbels and cut the board for the bottom of the mantel beam.
7. Create the faux brick corbels.
8. Attach the corbels to the bottom board.

How do you make wood look distressed?

1. Prepare Your Space. Start by laying down drop cloths and preparing the area.
2. Sand and Clean the Piece. Sand the surface of the piece.
3. Paint the Piece.
4. Apply Wax and Top Layer of Paint (Optional)
5. Distress the Piece with Sandpaper and Steel Wool.
6. Apply a Stain (Optional)
7. Protect the Finished Piece with Polyurethane.

How do you install a heavy wood mantel?

Slide Over Bolts Method

1. Locate the studs behind the brick, stone, or faux veneer.
2. Drive 1/2in lag screws through each of the studs.
3. Have a helper support the mantel while you mark the location of the support rods on the back of the beam.
4. Apply construction adhesive into the holes.
5. Slide into place, admire, and enjoy!