What does it mean when my stove says bad line?

It could be a problem with the stove, but it could also be an indication of an electrical problem such as a loose connection which could be anywhere between the power terminals in the stove where the stove cord connects, the receptacle, on back to the breaker in the panel.

.

Herein, what does it mean when my oven says Loc?

LOC means the control panel is locked. Per the Use and Care Guide: 1. Check that the oven and cooktop are off.

Likewise, what does f4 mean on a GE oven? This code usually means that the oven sensor needs to be replaced. F4. This code usually means that the oven sensor needs to be replaced. F5. This code usually means that the electronic control needs to be replaced.

Thereof, how do you reset a GE stove?

How to Reset a GE Built-In Oven

1. Select the "Clear" button on the built-in GE oven.
2. Switch off the circuit breaker that is controlling the GE built-in oven.
3. Turn the power back on to your GE built-in wall oven.
4. Set the clock of your GE built-in oven after you have reset the appliance.

What does f7 mean on GE Profile stove?

Many ovens built by GE display error codes on the display when problems are detected. The F7 error code indicates that there is a problem with the buttons of the control panel. The code comes on when two or more buttons are stuck at the same time. The oven cannot operate when this condition exists.

Related Question Answers

How do you unlock oven controls?

To unlock an oven, hold down the Lock button on your control panel for 2 or 3 seconds and wait for the oven to beep to indicate it's unlocked. If this doesn't work, unplug it from the electrical outlet and wait a few minutes. Then, plug it back in again, which may reset the temperature gauge and cause it to unlock.

Why is my stove locked?

If your oven is cool, then you may have Child Lock turned on or need to power cycle the range to unlock the door. When the range is too hot, the door will lock. On some models, the door will also lock when the range is powered off. To unlock the oven door, power on the range and/or allow the oven to cool down.

What is control lockout on a range?

The range Lockout feature allows the user to lock out all oven and surface burner operation. As of summer 2013 (with the exception of the CGS985, CGS990, and C2S985) the control lockout button locks out the oven controls only, not the gas burners.

How do I clear f9 code?

How to Remove the F9 Code From Maytag

1. Hold on the "Start/Stop" button for 10 seconds. This will end the beeping.
2. Open the oven door and check the door latch. If it wiggles, it needs to be tightened.
3. Spray a little WD-40 onto a washcloth and scrub off any rust or debris on the latch.
4. Press the oven door shut gently.
5. Test the oven.

How do you unlock the controls on a Whirlpool oven?

To lock the control panel, press and hold LOCK for 3 seconds. An indicator light above Lock will turn on. To unlock the control panel, press and hold LOCK for 3 seconds.

How do I unlock my GE oven?

Unlock a GE Oven Control Panel The lockout setting is activated by pushing and holding the "lock controls" button for three seconds. Deactivating the lockout is also accomplished by holding down the "lock controls" button for three seconds.

How do I turn off the LOC on my Whirlpool oven?

Press and hold START for 5 seconds. A single tone will sound, and "Loc" will appear on the display. Repeat to unlock. "Loc" will disappear from the display.

How do you reset a stove?

Reset the electronic control.

1. Turn the breaker to the OFF position.
2. Wait one minute, then turn the breaker back to the ON position to reset.
3. This needs to be done even if the light or the clock on the range is working.

Do stoves have a reset button?

Your oven might also have a circuit breaker with a reset button on the control console or on top of the oven that needs to be reset. If you are still confounded, pull the oven away from the wall. If it is a range/oven combo, make sure it is plugged securely into the wall.

Does a stove have a fuse?

Many electric ranges include a fuse in the 120-volt circuit that operates such items as oven and stovetop lights, the electric clock, convenience outlets, etc. In order to check the fuses on your electric range, the following steps should be taken: Visually inspect the fuse to see if it has blown.

Where are the fuses on a GE stove?

The fuse is usually located in the main house fuse box on the back of your unit. The location may vary with different models, so refer to your unit's manual. If the fuse looks smoky or black, it is likely blown. Replace it; purchase a fuse from a retail, hardware or appliance store.

Why does my stove top work but not my oven?

Electric Oven Not Heating. If everything is working properly BUT the oven, it usually means that the baking element and the broil element are intact and working. The issue is most likely a bad internal fuse, oven temp sensor, thermostat, a broken/frayed wire, power issue, or an oven control board.

What does FO mean on my GE oven?

Best answer. The F0 error code indicates that the control board detects a stuck key on the control keypad. This is often caused by a bad control keypad but it can sometimes be caused by a failed electronic control board in the oven console. A technician will normally determine which component is causing the problem by.

Where is the temperature sensor on a GE oven?

Unplug the power cord, open the door and remove the oven racks. Locate the oven sensor between the two prongs of the upper heating element protruding through the back of the oven. Use a 7/16 inch nut driver to remove the single screw securing the sensor to the back of the oven.

Why does my stove keep beeping f1?

When an F1 error occurs, the display flashes the code and beeps at the same time. To stop the flashing and beeping, press the "Cancel" button. Try the bake or broil feature once more, and if the error code repeats, unplug the appliance and wait five minutes before plugging it back in.

What does f9 mean on a GE Profile oven?

An F9 error code on a General Electric (GE) oven indicates that the oven's electronic control system has detected a problem with the automatic door lock. The automatic door lock mechanism prevents the oven door from being opened when the oven is set for "Clean" mode.

How do I get rid of the control panel on my GE oven?

How to Remove a GE Profile Oven's Control Panel

1. Turn off the oven breaker in your fuse box to disconnect power to the oven.
2. Pull off the knobs on the front of the control panel. If necessary, use a spoon to help pry them off.
3. Remove the three screws located on the underside of the control panel and set them aside.
4. Lift the control panel off of the oven.

What does f8 mean on a GE oven?

Error Code Definition The "F8" codes means that the built-in meat probe has shorted out. The meat probe measures temperatures of baked meats such as turkey and ham. When it shorts out, the electrical wires have failed and the proper temperature cannot be sent to the LCD screen.