How do you calculate curtain stack back?

For example, a 48-inch-wide window opening divided by 6 equals 8 inches for the rod extensions on each side of the window. If your curtain is a single panel that pulls back to one side or the other, divide the window width by 3 to calculate the stack back.

Just so, what is curtain stack back?

Stack back is the amount of space the curtains occupy when in the fully open position.

Likewise, where should curtain rod brackets be placed? Generally, hanging curtain brackets on the wall above and outside the window molding looks best, since it allows fabric to fall gracefully. If you have detailed window frames you don't want to cover, an inside mount (hanging curtains within the frame, as you would with a tension rod) can work.

Also Know, how much should I allow for curtain gather?

We would always recommend at least 2.5x gather, but we are often asked by customers on a budget whether dropping to 2x or 1.5x gather will save them money, and the answer is obviously yes!

Do eyelet curtains need to be double width?

You need to allow for both flat panels to be a minimum of one and a half times the curtain pole width. I personally think they look much better at double the pole width. Give or take a couple of inches. This allows the curtains to have enough fabric to allow the pleats to look right when hanging over your window.

How wide should curtains be for 72 inch window?

Example: If your window measures 36" wide (window width x 2 = 72"), you need curtains that will give a minimum width of 72" or 2 panels for that window. In this case 2 panels will give about 100" to 120" of width which will look nice and full. Always round up to the next full number.

How do you measure curtain width?

Divide your total by the width of a single curtain panel to get the number of panels you need. ~ Multiply window width by 2.5 to 3 if you want curtains tightly gathered for a full, luxurious look. Divide your total by the width of a single curtain panel to get the number of panels you need.

How do I hang curtains?

DO Hang High The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.

How much fabric do I need for curtains calculator?

Yardage Fabric Calculator-Drapes For Standard Width Panels: Finished length of curtains + 16 inches divided by 36 = number of yards required. Add 1 extra yard (or one vertical repeat of the fabric) per pair if using a large print fabric.

How do you calculate the weight of curtains?

To compute the curtain weight, add the Velour fabric weight to the liner weight to get a sum of 33 ounces per square yard. Divide by 9 to get 3.67 ounces per square foot. The height of the curtain is 20 feet, add 1 foot for top hem and bottom chain pocket and then multiply 21 x 3.67 = 77.07 ounces.

How do you measure for blackout curtains?

Tips for Measuring Blackout Curtains

Tip #1 - Top of Window. Make sure the rod for the blackout curtains is above the top of the window to block as much light as possible.
Tip #2 - Length. Measure from where you'll be positioning the rod for the blackout curtains to the very bottom of the window frame.
Tip #3 - Sides.

How do you gather curtains evenly?

To create gather, start by measuring your curtain pole and add 6 inches. Then, half the total number and this is what you must pull your curtains to. Hold all three strings at once and pull as evenly as possible. Before tying the strings to finish, hold the curtain up at the window to check it looks ok.

Are curtain sizes per curtain or pair?

The size given refers to each individual curtain, so if you buy a pair of curtains measuring 117cm x 137cm (46" x 54") you will receive two curtains each with the same measurement of width 117cm x length 137cm (width 46" x length 54").

Do eyelet curtains look cheap?

One the reasons eyelets are cheaper (and look cheaper) is because they don't use as much fabric, so you lose the cosy fullness of pencil-pleat curtains.

Should curtains touch the floor or window sill?

In formal or dressy rooms, curtains should just touch the floor. A romantic room deserves elegant, extra-long curtains that pool or puddle on the floor. Curtains to the sill, or to the bottom of the window trim (called the apron), look great and are practical in a kitchen.

What is the best gather for net curtains?

Twice the window width is generally the recommended amount of gather, two and a half times will give a fuller look. Once the window width has been measured, decide whether x1. 5, x2, x2. 5 or even 3 times the gather is required before ordering.

How do I calculate how much fabric I need to repeat a curtain?

To calculate the amount of patterned fabric required to make a pair of curtains:

Multiply the "Number of fabric widths" by Adjusted Cut Drop.
Add one vertical pattern repeat (this allows you to choose where the pattern starts)

Do curtain rods need to be hang on studs?

If there IS NOT a stud, you will use a drywall anchor and a screw. The anchors are the white pieces in the below photo: Knowing which to use is very important — without a drywall anchor, a screw alone will not hold the weight of the curtain and rod. If you do not have a stud finder, you can use a hammer and a nail.